IEC 60320 Connector Chart | Power Cords,Extension Cords Manufacturer Supplier Factory in China

IEC 60320-1-2007 INTERNATIONAL STANDARD – Appliances couplers for household and similar general purposes

Appliance Coupler Number of Standard Sheet for		Infomations
Appliance Inlet（male）	Connector（female）	Infomations
C2	C1	Rated current of appliance coupler (A)	0.2
		Class of equipment	II
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 41
		Minimum cross-section (mm)	—⁽¹⁾
		Standard sheet of IEC 60083	A 1-15 , B , C 5
C6	C5	Rated current of appliance coupler (A)	2.5
		Class of equipment	I
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 52
		Minimum cross-section (mm)	0.75
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 4
C8	C7	Rated current of appliance coupler (A)	2.5
		Class of equipment	II
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 52
		Minimum cross-section (mm)	0.75⁽²⁾
		Standard sheet of IEC 60083	A 1-15 , B 2 , C 5 , C 6
C10	C9	Rated current of appliance coupler (A)	6
		Class of equipment	II
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 52
		Minimum cross-section (mm)	0.75
		Standard sheet of IEC 60083	A 1-15 , B 2 , C 6
C14	C13	Rated current of appliance coupler (A)	10
		Class of equipment	I
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	Yes
		Lightest type allowed	60227 IEC 53 or 60245 IEC 53
		Minimum cross-section (mm)	0.75⁽³⁾
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 3b , C 4
C16	C15	Rated current of appliance coupler (A)	10
		Class of equipment	I
		Maximum temperature of appliance inlet	120℃
		Rewirable construction allowed	Yes
		Lightest type allowed	60245 IEC 53 or 60245 IEC 51
		Minimum cross-section (mm)	0.75⁽³⁾
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 3b , C 4
C16A	C15A	Rated current of appliance coupler (A)	10
		Class of equipment	I
		Maximum temperature of appliance inlet	155℃
		Rewirable construction allowed	Yes
		Lightest type allowed	60245 IEC 53 or 60245 IEC 51
		Minimum cross-section (mm)	0.75⁽³⁾
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 3b , C 4
C18	C17	Rated current of appliance coupler (A)	10
		Class of equipment	II
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 53 or 60245 IEC 53
		Minimum cross-section (mm)	0.75⁽³⁾
		Standard sheet of IEC 60083	A 1-15 , B 2 , C 6
C20	C19	Rated current of appliance coupler (A)	16
		Class of equipment	I
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	Yes
		Lightest type allowed	60227 IEC 53 or 60245 IEC 53
		Minimum cross-section (mm)	1⁽³⁾
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 3b , C 4
C22	C21	Rated current of appliance coupler (A)	16
		Class of equipment	I
		Maximum temperature of appliance inlet	155℃
		Rewirable construction allowed	Yes
		Lightest type allowed	60245 IEC 53 or 60245 IEC 51
		Minimum cross-section (mm)	1⁽³⁾
		Standard sheet of IEC 60083	A 5-15 , B 2 , C 2b , C 3b , C 4
C24	C23	Rated current of appliance coupler (A)	16
		Class of equipment	II
		Maximum temperature of appliance inlet	70℃
		Rewirable construction allowed	No
		Lightest type allowed	60227 IEC 53 or 60245 IEC 53
		Minimum cross-section (mm)	1⁽³⁾
		Standard sheet of IEC 60083	A 1-15 , B 2 , C 6
1. (1)Only for small hand-held appliances, in length not exceeding 2 m, if allowed by the relevant appliance standard. 2. (2)0,5 mm2 is allowed for lengths not exceeding 2 m. 3. (3)If the cord has a length exceeding 2 m or is of the retractable coiled (pre-coiled) type, nominal cross-sectional areas shall be – 1 mm2 for 10 A connectors – 1.5 mm2 for 16 A connectors

风神电子：

联系信息：

快捷导航：